Tel:   020 46925634
Mon - Sat: 09:30 - 06:00 / Closed on Sunday


HomeShop3M Tapes & Adhesives3M™ Neoprene High Performance Contact Adhesive 1357

3M™ Neoprene High Performance Contact Adhesive 1357


SKU: 28675 Category:
Application Method
Brush, Spray
Environmental Considerations
California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Ozone Transport Commission, SCAQMD
Flame Retardant
Heat Resistance
<230 Degree Fahrenheit
Construction, Furniture, General Industrial, MRO, Packaging, Retail, Specialty Vehicle, Transportation, Woodworking
Open Time
30 min
Physical Form
Thin liquid
Product Form
Solids Weight Percent (Approximate)
23 to 27 Percent
Surface Type
Metal, Plastic, Wood


3M™ Neoprene High Performance Contact Adhesive 1357 is a versatile, solvent based adhesive. It offers high immediate handling strength and good heat resistance, and is commonly used for bonding most metals and plastics. It is also suitable for large surface panel or composite lamination.

A Versatile Rubber and Gasket Adhesive Our 3M™ Neoprene High Performance Contact Adhesive 1357 has been one of our most versatile solvent based adhesives for heavy duty surface laminations for 60-plus years. This adhesive bonds to plastics and metals, including sheet metal, stainless steel.  It provides excellent heat and water resistance, performing in temperatures up to 300°F/148°C. 3M™ Neoprene High Performance Contact Adhesive 1357 dries quickly while allowing time for positioning and adjustments without slowing down work processes. Recommended Applications Metal honeycomb composite panels Durable stainless steel to wood panels Woodworking Applying Your Adhesive Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

  • High performance laminating contact adhesive
  • Adheres, sheet metals, such as stainless steel, aluminum, cold rolled steel and many plastics to numerous other substrates
  • High performance laminating adhesive
  • Excellent moisture and heat resistance and will perform up to up to 300°F/148°C
  • Available in tubes, cans or pails

Additional information

Weight 20 kg
Dimensions 35 × 35 × 37 cm

Pack Size